3D Printing the Novel Coronavirus
Posted on by Dr. Francis Collins
The coronavirus disease 2019 (COVID-19) pandemic has truly been an all-hands-on-deck moment for the nation. Among the responders are many with NIH affiliations, who are lending their expertise to deploy new and emerging technologies to address myriad research challenges. That’s certainly the case for the dedicated team from the National Institute of Allergy and Infectious Diseases (NIAID) at the NIH 3D Print Exchange (3DPX), Rockville, MD.
A remarkable example of the team’s work is this 3D-printed physical model of SARS-CoV-2, the novel coronavirus that causes COVID-19. This model shows the viral surface (blue) and the spike proteins studded proportionally to the right size and shape. These proteins are essential for SARS-CoV-2 to attach to human cells and infect them. Here, the spike proteins are represented in their open, active form (orange) that’s capable of attaching to a human cell, as well as in their closed, inactive form (red).
The model is about 5 inches in diameter. It takes more than 5 hours to print using an “ink” of thin layers of a gypsum plaster-based powder fused with a colored binder solution. When completed, the plaster model is coated in epoxy for strength and a glossy, ceramic-like finish. For these models, NIAID uses commercial-grade, full-color 3D printers. However, the same 3D files can be used in any type of 3D printer, including “desktop” models available on the consumer market.
Darrell Hurt and Meghan McCarthy lead the 3DPX team. Kristen Browne, Phil Cruz, and Victor Starr Kramer, the team members who helped to produce this remarkable model, created it as part of a collaboration with the imaging team at NIAID’s Rocky Mountain Laboratories (RML), Hamilton, MT.
The RML’s Electron Microscopy Unit captured the microscopic 3D images of the virus, which was cultured from one of the first COVID-19 patients in the country. The unit handed off these and other data to its in-house visual specialist to convert into a preliminary 3D model. The model was then forwarded to the 3DPX team in Maryland to colorize and optimize in preparation for 3D printing.
This model is especially unique because it’s based exclusively on SARS-CoV-2 data. For example, the model is assembled from data showing that the virus is frequently oval, not perfectly round. The spike proteins also aren’t evenly spaced, but pop up more randomly from the surface. Another nice feature of 3D printing is the models can be constantly updated to incorporate the latest structural discoveries.
That’s why 3D models are such an excellent teaching tools to share among scientists and the public. Folks can hold the plaster virus and closely examine its structure. In fact, the team recently printed out a model and delivered it to me for exactly this educational purpose.
In addition to this complete model, the researchers also are populating the online 3D print exchange with atomic-level structures of the various SARS-CoV-2 proteins that have been deposited by researchers around the world into protein and electron microscopy databanks. The number of these structures and plans currently stands at well over 100—and counting.
As impressive as this modeling work is, 3DPX has found yet another essential way to aid in the COVID-19 fight. In March, the Food and Drug Administration (FDA) announced a public-private partnership with the NIH 3D Print Exchange, Department of Veterans Affairs (VA) Innovation Ecosystem, and the non-profit America Makes, Youngstown, OH . The partnership will develop a curated collection of designs for 3D-printable personal protective equipment (PPE), as well as other necessary medical devices that are in short supply due to the COVID-19 pandemic.
You can explore the partnership’s growing collection of COVID-19-related medical supplies online. And, if you happen to have a 3D printer handy, you could even try making them for yourself.
 FDA Efforts to Connect Manufacturers and Health Care Entities: The FDA, Department of Veterans Affairs, National Institutes of Health, and America Makes Form a COVID-19 response Public-Private Partnership (Food and Drug Administration)
Coronavirus (COVID-19) (NIH)
NIH 3D Print Exchange (National Institute of Allergy and Infectious Diseases/NIH, Rockville, MD)
Rocky Mountain Laboratories (NIAID/NIH, Hamilton, MT)
Department of Veterans Affairs (VA) Innovation Ecosystem (Washington, D.C.)
America Makes (Youngstown, OH)
NIH Support: National Institute of Allergy and Infectious Diseases
Electricity-Conducting Bacteria May Inspire Next-Gen Medical Devices
Posted on by Dr. Francis Collins
Technological advances with potential for improving human health sometimes come from the most unexpected places. An intriguing example is an electricity-conducting biological nanowire that holds promise for powering miniaturized pacemakers and other implantable electronic devices.
The nanowires come from a bacterium called Geobacter sulfurreducens, shown in the electron micrograph above. This rod-shaped microbe (white) was discovered two decades ago in soil collected from an unlikely place: a ditch outside of Norman, Oklahoma. The bug can conduct electricity along its arm-like appendages, and, in the hydrocarbon-contaminated, oxygen-depleted soil in which it lives, such electrical inputs and outputs are essentially the equivalent of breathing.
Scientists fascinated with G. sulfurreducens thought that its electricity had to be flowing through well-studied microbial appendages called pili. But, as the atomic structure of these nanowires (multi-colors, foreground) now reveals, these nanowires aren’t pili at all! Instead, the bacteria have manufactured unique submicroscopic arm-like structures. These arms consist of long, repetitive chains of a unique protein, each surrounding a core of iron-containing molecules.
The surprising discovery, published in the journal Cell, was made by an NIH-funded team involving Edward Egelman, University of Virginia Health System, Charlottesville. Egelman’s lab has had a long interest in what’s called a type 4 pili. These strong, adhering appendages help certain infectious bacteria enter tissues and make people sick. In fact, they enable bugs like Neisseria meningitidis to cross the blood-brain barrier and cause potentially deadly bacterial meningitis. While other researchers had proposed that those same type 4 pili allowed G. sulfurreducens to conduct electricity, Egelman wasn’t so sure.
So, he took advantage of recent advances in cryo-electron microscopy, which involves flash-freezing molecules at extremely low temperatures before bombarding them with electrons to capture their images with a special camera. The cryo-EM images allowed his team to nail down the atomic structure of the nanowires, now called OmcS filaments.
Using those images and sophisticated bioinformatics, Egelman and team determined that OmcS proteins uniquely fit into the nanowires’ long repetitive chains, spacing their iron-bearing cores at regular intervals to transfer electrons and convey electricity. In fact, bacteria unable to produce OmcS proteins make filaments that conduct electricity 100 times less efficiently.
With these cryo-EM structures in hand, Egelman says his team will continue to explore their conductive properties. Such knowledge might someday be used to build biologically-inspired nanowires, measuring 1/100,000th the width of a human hair, to connect miniature electronic devices directly to living tissues. This is one more example of how nature’s ability to invent is pretty breathtaking—surely one wouldn’t have predicted the discovery of nanowires in a bacterium that lives in contaminated ditches.
 Structure of Microbial Nanowires Reveals Stacked Hemes that Transport Electrons over Micrometers. Wang F, Gu Y, O’Brien JP, Yi SM, Yalcin SE, Srikanth V, Shen C, Vu D, Ing NL, Hochbaum AI, Egelman EH, Malvankar NS. Cell. 2019 Apr 4;177(2):361-369.
Electroactive microorganisms in bioelectrochemical systems. Logan BE, Rossi R, Ragab A, Saikaly PE. Nat Rev Microbiol. 2019 May;17(5):307-319.
High Resolution Electron Microscopy (National Cancer Institute/NIH)
Egelman Lab (University of Virginia, Charlottesville)
NIH Support: National Institute of General Medical Sciences; National Institute of Allergy and Infectious Diseases; Common Fund